bing tracking image

Accessories and Parts Installation And Review Videos


Review of Redline Trailer Brakes - Replacement Manual Adjuster Spring - BP08-070- Video

Review of Redline Trailer Brakes - Replacement Manual Adjuster Spring - BP08-070

Hello, everybody. This is Jeff at etrailer.com. Today we take a look at this replacement manual adjuster spring for your 10 inch and 12 inch electric trailer brake assemblies. Now this part here will replace a worn or damaged spring from your manual adjust electric brake assemblies. This is compatible with the brake assemblies from most manufacturers, including AxleTech, Dexter, Lippert, and Alko. As we mentioned, this is designed to work with 10 inch or 12 inch manual adjust brake assemblies without a parking brake. more


Watch Video

4/23/2024 12:53:09 PM



Review of Kuat Flush Mount Kit for Kuat Switch racks - KU36RR- Video

Review of Kuat Flush Mount Kit for Kuat Switch racks - KU36RR

Hello neighbors, I'm Steven here with etrailer.com. Today we're looking at this Flush Mount Kit for your Kuat Switch. That's right, folks. This kit will let you mount your Kuat Switch ski carrier into the top channels of your roof rack crossbars. Now it does work with both the Switch 4 and the Switch 6. That's a picture of the 6 right there. more


Watch Video

4/23/2024 12:46:04 PM



Review of Kuat 4 Pin Flat Rack to Car Wiring Harness - KU56RR- Video

Review of Kuat 4 Pin Flat Rack to Car Wiring Harness - KU56RR

Hello neighbors, Steven here with etrailer.com. Today, we're looking at the Kuat 4 pin flat rack to car wiring harness. Now folks, this will replace a pinched or cut wiring harness on your Kuat Piston Pro X. Now it does work with multiple model numbers. I'll put them on the screen. It's gonna give you a new four pole to four pole extension. more


Watch Video

4/23/2024 12:38:01 PM



Review of Kuat Wiring Harness Extension for Kuat Piston Pro X - KU29RR- Video

Review of Kuat Wiring Harness Extension for Kuat Piston Pro X - KU29RR

Hello neighbors, I'm Steven here with etrailer.com. Today we're looking at this wiring harness extension for your Kuat Piston Pro X, and it's a nine foot long extension. So folks, just like it says, this nine foot extension will let you extend your wiring harness so that you can mount your Kuat Piston Pro X on a pivot swing away hitch extender. Now I'll pop up a picture here on the screen of that extender, that swing away extender rather. And note, they do make this to where you can, you get a driver's side version, where it'll swing away towards the driver's side and they got another option that can swing away to the passenger side. So keep that in mind, those are sold separately. more


Watch Video

4/23/2024 12:29:21 PM



Review of Kuat License Plate Holder - KU87RR- Video

Review of Kuat License Plate Holder - KU87RR

Hello neighbors, I'm Steve here with etrailer.com. Today, we're looking at the license plate holder for the Kuat NV 2.0 series bike racks. Now folks, this does work with a very, very wide range of Kuat NV 2.0 bike racks, I'll put all the model number and options up on the screen here. It's a very simple bolt on installation with the included hardware and tools. So this bracket for your license plate can tilt to a couple different options. The main bolt here is gonna go through and you got two bolts to help hold on the license plate. more


Watch Video

4/23/2024 11:30:42 AM



Review of Thule Ladder Rack Replacement Hardware Kit - TH752-1391-001- Video

Review of Thule Ladder Rack Replacement Hardware Kit - TH752-1391-001

Hello, neighbors. I'm Steven here with etrailer.com. Today, we're looking at this replacement fastener kit for the Thule Xsporter Pro Ladder Racks. Now, if you're not sure what those ladder racks look like, here's an image on the screen. That is the base model, the TH500. We also offer it as a TH500XT. more


Watch Video

4/23/2024 11:13:23 AM



Review of Thule Replacement End Seal Cap - 853-5961- Video

Review of Thule Replacement End Seal Cap - 853-5961

Hello neighbors and friends. I'm Steven here with etrailer.com. Today we're looking at this replacement plastic end seal cap for your Thule T2 bike racks. Now folks, this will replace one quantity, one lost or damaged end cap for your Thule T2 platform-style hitch mounted bike carriers. It does work with a couple of different models, so I'll throw the item numbers up here on the screen, and it installs in the end of your horizontal support tubes. Now getting some measurements here. more


Watch Video

4/23/2024 10:57:08 AM



Review of Swagman Replacement Non Locking Knob - P1041- Video

Review of Swagman Replacement Non Locking Knob - P1041

Hello neighbors, Steven here with etrailer.com. Today, we're looking at this replacement non-locking knob for your Swagman Original and XP series bike carriers that we inchesre made 2009 and newer. So folks, this does replace one of those non-locking knobs, again for your Swagman Original or XP series bicycle carrier that was from '09 and newer. There's just one option there on the screen I'll throw up there. So those top two black plastic knobs, this is gonna replace one, again, quantity one of those. Now it does hold the top plate of your bike rack securely in place. more


Watch Video

4/23/2024 10:49:10 AM



Review of Thule Replacement Bottom Hook - 853-7748- Video

Review of Thule Replacement Bottom Hook - 853-7748

Hello neighbors, Steven here with etrailer.com. Today, we're looking at the replacement bottom hook for your Thule Raceway bike carriers. So folks, this is a quantity one direct replacement from Thule. It does fit the Thule Raceway bike carriers. I'll put those three item numbers up there on the screen. You could check them out, but this is a direct factory replacement part so you can ensure it's gonna work with those Thule Raceway bike carriers. more


Watch Video

4/23/2024 10:36:24 AM



Review of Yakima SKS Lock Core A136 - Y8771-A136- Video

Review of Yakima SKS Lock Core A136 - Y8771-A136

Hello neighbors, Steven here with etrailer.com. Today we're looking at the replacement SKS or same key system lock core for your Yakima Racks and carriers, specifically core number A136. Now folks, this will replace or add one Yakima SKS lock cylinder to your system and it can allow all your Yakima products to then be keyed alike, it does fit key A136 that's sold separately. I'll pop that number on the screen and as you can see, you got an engraving there on the core there. That's the A136. So that's how you know which core it is. more


Watch Video

4/23/2024 10:27:58 AM



Review of Thule Replacement Square Head Bolt - 853-2089- Video

Review of Thule Replacement Square Head Bolt - 853-2089

Hello, neighbors. Steve here with etrailer.com. Today we're looking at this Thule replacement square head bolt. Now folks, this is a factory direct Thule replacement part, so you can be sure it's gonna work with your Thule products. It's most commonly used on roof rack applications, those kinda things. It is a size 61 millimeter. more


Watch Video

4/23/2024 10:17:49 AM



Review of Dexter Trailer Brakes - Replacement Disc Brake Piston - 054-093-00- Video

Review of Dexter Trailer Brakes - Replacement Disc Brake Piston - 054-093-00

Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at this replacement 1 7/8 inch diameter disc brake piston for your Dexter 6,000 lb and 8,000 lb dual piston calipers. Now this piston installs into your brake caliper with a seal, and when the brakes are applied, the hydraulic pressure forces this piston up against the brake pad to stop the rotor from turning and applies your brakes. Now this disc brake piston will fit both the Dexter dual piston 6,000 lb caliper which is part number K71-636-00. And also the Dexter dual piston 8,000 lb caliper, part number K71-630. Both of those we do sell separately on our website. more


Watch Video

4/23/2024 10:12:40 AM



Review of Hollywood Racks Sport Rider Bike Carrier Replacement Foam Pad - HRSPR-FP- Video

Review of Hollywood Racks Sport Rider Bike Carrier Replacement Foam Pad - HRSPR-FP

Hi everybody. Andy here with etrailer.com. Let's take a brief look at this Hollywood Racks Replacement Foam Pad. Now this is going to replace one foam pad for the long or short sliding hook on your Hollywood Rack Sport Rider Bike Carrier. On your screen, I went ahead and included all the model numbers of that bike carrier that this foam pad is going to fit. And as you know, this does prevent the sliding hook on your bike carrier from scratching the paint on your bike. more


Watch Video

4/23/2024 9:32:30 AM



Review of Blue Ox Acclaim Tow Bar Cover - BX88156- Video

Review of Blue Ox Acclaim Tow Bar Cover - BX88156

Hello, neighbors and friends, I'm Steven here with etrailer.com. Today, we're looking at this nice tow bar cover for your Blue Ox Acclaimed Tow Bars, that's right, folks, this cover is designed and made specifically to protect your Blue Ox Acclaimed Tow Bar from the elements when it's stored on the back of your RV. And like I said, this is custom fit for the Blue Ox Acclaim Tow Bar. I'll throw an image up here on the screen of what that looks like. Now, this is made of a nice heavy duty black vinyl. It is marine grade vinyl so you can ensure that it's gonna be safe for car washes, all the road hazards, that kind of stuff that gets thrown up. more


Watch Video

4/23/2024 9:31:16 AM



Review of Swagman Replacement Wheel Tray Quad 2+2 Bike Rack - SQ1011- Video

Review of Swagman Replacement Wheel Tray Quad 2+2 Bike Rack - SQ1011

Hi everybody. Andy here with etrailer.com. Let's take a real quick look at the Swagman replacement wheel tray. Now this is going to replace the inner left or outer right wheel tray of your Swagman Quad 2+2 bike rack. Now on your screen, I am including the model number of that bike rack for your reference, but also I'm including an image, a diagram there, showing you where you can place this replacement wheel tray. So hopefully that will give you a further confirmation that this is what you are going to need and this is the direct replacement from Swagman. more


Watch Video

4/23/2024 9:12:42 AM



Review of Thule Replacement Body Frame for Thule Van Rack - TH52VK- Video

Review of Thule Replacement Body Frame for Thule Van Rack - TH52VK

Hello neighbors, I'm Steven here with etrailer.com. Today, we're looking at this replacement body frame for your Thule Elite Van XT Bike Racks. That's right folks, this is just a direct Thule replacement part, the body of your Thule Elite Van XT Bike Rack. If you're not familiar with what that rack look like, here's one option, we sell two different options. Now these are gonna fit most Sprinter vans, Dodge, Mercedes, Freightliner, and one of the other styles is gonna fit the ProMaster vans, just depends on which rack you get. Now I'll throw both of those item numbers up here on the screen, if you don't have one already, you can check them out. more


Watch Video

4/23/2024 9:00:17 AM



Review of Ventline RV Vents and Fans - Wall Remote Switch - VC0533-02-A- Video

Review of Ventline RV Vents and Fans - Wall Remote Switch - VC0533-02-A

Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at the wall remote switch for the Ventline Ventadome roof vent. Now this part here will let you operate your Ventline powered roof vent from the wall switch. Basically right over here, you can open or close your vent dome. And over here, you have an on and off switch for the fan. And this is designed to mount on the wall of your RV or enclosed trailer. more


Watch Video

4/23/2024 8:55:33 AM



Review of Demco Sentry Deflector Adapter Kit Blue Ox Base Plate - DM9523061- Video

Review of Demco Sentry Deflector Adapter Kit Blue Ox Base Plate - DM9523061

Hi everybody, Andy here with etrailer.com. Let's take a brief look at this Demco Sentry deflector adapter kit for your Blue Ox base plates. This adapter kit is going to let you use your Demco Sentry deflector with your Blue Ox base plates. On your screen, I am including the model number of that Sentry deflector for your reference, and this kit is from Demco, so that's gonna give you the confidence that you need, knowing that this is going to work right in line with your Demco Sentry deflector. This does include everything that you see here, along with a set of instructions to guide you through that installation process. Well, that's gonna wrap up our brief look today. more


Watch Video

4/23/2024 8:54:15 AM



Yakima HomeBase SUV Storage Drawer MOD Topper Review- Video

Yakima HomeBase SUV Storage Drawer MOD Topper Review

Hey there, it's Evangeline here at etrailer. Today we have the Yakima MOD Topper. This is gonna fit your Yakima HomeBase, where you can then expand your cargo capacity, giving you more height compares to your HomeBase drawer. We're gonna take a look at how this MOD Topper fits, why you might get it, as well as how it installs right here at etrailer.com. If you're not familiar with the MOD system, it is a modular storage organization system from Yakima. It is designed to be used with different accessories where you mix and match depending on what you need to carry. more


Watch Video

4/23/2024 8:53:29 AM



Review of Roadmaster Mounting Bracket for Pulley - RM-8700-PBC- Video

Review of Roadmaster Mounting Bracket for Pulley - RM-8700-PBC

Hello neighbors, Steven here with etrailer.com. Today we're looking at our pulley mounting bracket for your Roadmaster Invisibrake Flat Tow Brake System. Now folks, you probably already have that flat tow Invisibrake system, so right now you need this because you need to provide a proper mounting location for that pulley that's included with that Roadmaster Invisibrake. Now, I'll pop a picture up here on the screen real quick. I know it's not the best, but you can see that silver pulley there in the center behind the carpet on the firewall behind the brick pedal. So obviously you can't see this bracket, but that pulley there is what's mounting to this bracket, and that's kind of the location, it's gonna be behind the brake pedal, mounted, screwed into the floor area behind the brake pedal. more


Watch Video

4/23/2024 8:12:38 AM



Review of B and W Pin and Clip - BWTS35011- Video

Review of B and W Pin and Clip - BWTS35011

Hello neighbors, I'm Steven here with etrailer.com. Today we're looking at the replacement adjustment pin and clip for your three inch B&W Tow and Stow ball mounts. That's right folks. So this again will replace one of those three main pins from your BNW Tow and Stow ball mounts ball mounts with the three inch receivers. So I went ahead and throw an image up here on the screen. Those three pins there on the bottom center of the page. more


Watch Video

4/23/2024 7:56:01 AM



Review of Extang Replacement Snap Studs for Tonneau Covers - EX7128- Video

Review of Extang Replacement Snap Studs for Tonneau Covers - EX7128

Hello, neighbors. I'm Steven here with etrailer.com and today we're taking a look at this replacement set of Offset Snap Studs for your Extang Classic Platinum Tonneau Covers. Now folks, these offset snap studs here do replace the snap studs included with your Extand Tonneau Cover. They simply slide along the frame rails, and they can be removed and rotated to ensure a proper fit. So what I mean is, I'll throw a graphic up here real quick. You can actually take these, slide them on or off depending on the type of weather, or the season, rather. more


Watch Video

4/23/2024 7:38:14 AM



Review of Hopkins Trailer Wiring Bracket - HM48605- Video

Review of Hopkins Trailer Wiring Bracket - HM48605

Hello, neighbors, I'm Steve here with etrailer.com. Today we're looking at our Hopkins mounting bracket for the 4-way, 5-way, or 6-way round trailer connectors. Now, this electrical bracket will let you mount, again, those 4, 5, and 6-way round connectors to the front of your vehicle, most commonly used in flat towing. I'll pop a picture up here as a demonstration. So that is a round connector mounted inside this bracket. And as you can see, they've kind of bolted up to the bumper on the front of a vehicle here that's being towed behind an RV. more


Watch Video

4/22/2024 3:23:25 PM



Review of Phoenix Faucets Replacement RenewableSeats - PF284008- Video

Review of Phoenix Faucets Replacement RenewableSeats - PF284008

Hello, neighbors and friends. I'm Steve here with etrailer.com. Today we're looking at replacement renewable seats for your Phoenix faucets. They also work with concealed tub and shower faucets as well. Now folks, these do replace both renewable seats for your two-handle or three-handle Phoenix faucets, a concealed tub and shower faucet as well. They're made of a nice durable brass construction and they are made here in the US. more


Watch Video

4/22/2024 3:07:09 PM



Review of Draw-Tite Sway Control Weld On Tab - 3442- Video

Review of Draw-Tite Sway Control Weld On Tab - 3442

Hello, friends and neighbors. Steve here with etrailer.com. Today we're looking at this replacement sway control tab for your weight distribution system. Now folks, this will replace the sway control mounting bar for your weight distribution system and it is a well-known application. We highly recommend you get it welded on by a professional, but if you're a DIYer and you know how to weld, go ahead and feel free to tackle it yourself. Now, just in case you're curious, this side over here gets welded on to the ball mount and it does fit the commonly one-on-one quarter inch sway-control little ball there. more


Watch Video

4/22/2024 2:45:53 PM



Review of Draw-Tite Replacement Conical Tooth Washer - 3232- Video

Review of Draw-Tite Replacement Conical Tooth Washer - 3232

Hello neighbors and friends, I'm Steven here with etrailer.com. Today we're looking at a simple conical tooth washer. That's right folks, if you're not familiar with these washers, the conical tooth washer that we're looking at today is commonly used in your weight distribution system. Normally it's gonna be used to help hold on the main two bolts that are attaching the head unit. Now zooming in here, you can see this conical tooth washer, you get quantity one. This guy has two inches overall, with a three quarter-inch wide center hole. more


Watch Video

4/22/2024 2:37:21 PM



Review of Westin Barrel Clip for NerfBars - 60-0244- Video

Review of Westin Barrel Clip for NerfBars - 60-0244

Hello, neighbors, this is Steven here with etrailer.com. Today, we're looking at a simple replacement barrel clip for your Westin Platinum Series and Signature Series round nerf bars. So, folks, basically you're replacing a step pad, that plastic centerpiece you step on on your Westin Signature Series or Platinum Series round step bar, and you have to have these barrel clips on those prongs on the bottom side of those pads. Let me throw an image up here real quick. So normally you have three to four of those black pegs sticking down, these barrel clips simply push up on top of those pegs, and then they get all four pressed down together in the nerf bar itself. Now keep in mind when you're installing these little guys, they all must be installed in the same direction and parallel with that nerf bar to install and hold correctly. more


Watch Video

4/22/2024 2:22:29 PM



Review of Reese Replacement Ring Kit for Elite Series5th Wheel - RP58458- Video

Review of Reese Replacement Ring Kit for Elite Series5th Wheel - RP58458

Hello, neighbors and friends. I'm Steven here with etrailer.com. Today we're looking at these replacement trim rings for your Reese Elite Series Fifth Wheel Rail Kit. Now folks, these simply replace lost or damaged trim rings on your Reese Elite Series Fifth Wheel Rail Kit. So as you can see, you get quantity four. These rings help create a snug fit for all the pucks when they're installed inside those underbed rails. more


Watch Video

4/22/2024 2:11:40 PM



Review of Redline Boat Trailer Wheels - Trailer Hubs and Drums - Wheel Bolts - RG02-060- Video

Review of Redline Boat Trailer Wheels - Trailer Hubs and Drums - Wheel Bolts - RG02-060

Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at the 9/16th inch wheel bolts with the 90 degree cone seat for a quantity of four bolts. Now these wheel bolts are used to hold your wheel and tire to your four lug vintage trailer hub. Those hubs have threaded holes that are either this 9/16th size by 18 size or the half inch by 20 size threads. Now these bolts have a 9/16ths by 18 thread size. They have a length which will measure the length of the tread, is right at one and one eighth inches long. more


Watch Video

4/22/2024 1:50:45 PM



Review of Bauer Products Replacement Key AE010 - BA86MR- Video

Review of Bauer Products Replacement Key AE010 - BA86MR

Hello, neighbors, I'm Steven here with etrailer.com. Today we're looking at a replacement key for your Bauer AE series locks. Specifically key number AE010. Now folks, this will replace one lost or damaged AE series key, again for your Bauer lock key number AE010, just like it's engraved there on the front of the key. If you need more than one, you just change the quantity. If you need a different key number, just simply check our website for the different number you're looking for. more


Watch Video

4/22/2024 1:43:32 PM



Review of Global Link Replacement Key 364 - 295-000143- Video

Review of Global Link Replacement Key 364 - 295-000143

Hello neighbors, Steven here with etrailer.com. Today we're looking at a replacement key for your global link RV locks, specifically key number 364. So again folks, this is one replacement key, quantity one. It's gonna work with your Global Link RV entry door, baggage door, or vice lock. You can see the key number 364 stamped there in the metal and it's got a nice hard plastic case over the key itself. That's gonna make it easier to differentiate this key on your key ring from other ones you may have. more


Watch Video

4/22/2024 1:41:07 PM



Review of Global Link Replacement Key 330 - 295-000056- Video

Review of Global Link Replacement Key 330 - 295-000056

Hello neighbors, Steven here with etrailer.com. Today we're looking at this simple replacement key for your Global Link RV locks. Now folks, this specific key is key number 330, and again, it's a replacement key that's gonna work with your global link RV entry door, baggage door, or vice lock. As you can see, the 330 is stamped on the key. You've also got a nice, hard plastic purple case. That's gonna make it easier to differentiate this key from other keys on your ring and also kind of protect it as well. more


Watch Video

4/22/2024 1:37:21 PM



Review of Global Link Replacement Key 351 - 295-000130- Video

Review of Global Link Replacement Key 351 - 295-000130

Hello neighbors, I'm Steven here with etrailer.com. Today we're looking at the replacement key number 351 for your Global Link RV locks. Now folks, this will work with your Global Link RV entry door, your baggage door, or your vice lock. Again, key to number 351, it's engraved right there on the key and it has a nice plastic hard shell there, that's gonna help differentiate this key from other keys on your ring, and it's a lot easier to find. Again, folks, quantity of one key with this purchase, key number 351. I'm Steven, thank you for your time, thanks for watching. more


Watch Video

4/22/2024 1:33:28 PM



Review of Global Link Replacement Key 348 - 295-000074- Video

Review of Global Link Replacement Key 348 - 295-000074

Hello neighbors, Steven here with etrailer.com. Today we're looking at this replacement key for your Global Link RV locks. Now folks, this replacement key does work with your global Link RV entry door, baggage door, or your vice lock. It's keyed specifically to number 348, you can see that engraved there and you're gonna get one key included with purchase. And as you can see, it's got the nice plastic purple covering. That's gonna help you differentiate it from other keys on your key ring, make it a lot easier to find. more


Watch Video

4/22/2024 1:30:34 PM



Review of JR Products Replacement Key J236 - 372J236-A- Video

Review of JR Products Replacement Key J236 - 372J236-A

Hello neighbors, Steven here with etrailer.com. Today we're looking at the replacement keys for your RV hatch doors. Now folks, these replacement keys work with hatch doors from most RV and camper manufacturers, and they're key number J236. You can see that engraved on both keys, again, J236. Now folks, you're gonna get quantity two keys just like you see here. Again, J236 replacement keys for the RV hatch doors. more


Watch Video

4/22/2024 1:25:42 PM



Review of Kodiak Rotor to Hub Spacer Bolt - KRB11-13- Video

Review of Kodiak Rotor to Hub Spacer Bolt - KRB11-13

Hello neighbors, Steve here with etrailer.com. Today we're looking at this rotor-to-hub spacer bolt. Now folks, this spacer bolt will mount your disc brake rotor to the hub spacer. It's gonna work with all 11, 13, and 15-inch rotors, and also 9,000, 10,000 and 12,000 pound axles. It is 1.25 inches long. Half inch diameter on the threads. more


Watch Video

4/22/2024 1:15:06 PM



Review of Demco Fifth Wheel Installation Kit Custom Brackets - DM8552030- Video

Review of Demco Fifth Wheel Installation Kit Custom Brackets - DM8552030

Hello, neighbors. Steve here with etrailer.com. Today we're looking at the Demco Premier Series custom mounting brackets for your 5th wheel above-bed base rails. Now folks, this is a custom-fit application. Those bed rails when they're installed would look something like this. Again, those are sold separately. more


Watch Video

4/22/2024 12:56:41 PM



Review of Kwikee RV and Camper Steps - Replacement 4 Pin Plug - LC369243- Video

Review of Kwikee RV and Camper Steps - Replacement 4 Pin Plug - LC369243

Hello everybody. This is Jeff at etrailer.com. Today we're gonna take a look at the replacement 4-pin Packard Connector plug for the Kwikee Electric RV steps. Now this part here replaces the 4-pin wiring plug on your Kwikee electric RV steps. This one is a 4-pin Packard connector. It's designed to prevent any dust and moisture from seeping into your connection point. more


Watch Video

4/22/2024 11:15:38 AM



Review of Ventline Replacement Push Button Switch - BV0199-03- Video

Review of Ventline Replacement Push Button Switch - BV0199-03

Hello, neighbors. I'm Steve here with etrailer.com. Today we're looking at the replacement push button switch for your Ventline trailer roof fence. That's right, folks. This is gonna replace a broken push button. (plastic clicking) You hear a click there, and it's a push button switch for your 12-volt fan motors. more


Watch Video

4/22/2024 10:55:27 AM



Review of Ventline Replacement Fan Motor Bracket - BVE0125-00- Video

Review of Ventline Replacement Fan Motor Bracket - BVE0125-00

Hello neighbors, I'm Steven here with etrailer.com, and today we're looking at a replacement fan motor bracket for your Ventline EZ-Lift Ventadome trailer roof vent. Now folks, this does replace a damaged fan motor bracket. Again, on your Ventline EZ-Lift Ventadome roof vent that has a 12-volt fan. Now it does work with a lot of different options, I'll throw those up on the screen here, those item numbers. And those are purchased separately. But you can also use those item numbers to make sure you're getting the right part for this guy. more


Watch Video

4/22/2024 10:49:06 AM



Review of Tuson RV Brakes TPMS Sensor - Replacement Ball Sensor - TUS47FR- Video

Review of Tuson RV Brakes TPMS Sensor - Replacement Ball Sensor - TUS47FR

Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this replacement ball sensor for the Tuson Towable Tire Pressure Monitoring Systems. This is for a quantity of one sensor. Now this will replace an internal ball sensor on your Tuson Towable Tire Pressure Monitoring Systems. It does work with the two systems that we sell. We sell those separately. more


Watch Video

4/22/2024 10:46:41 AM



Review of Ventline Replacement Fan Blade For Range Hoods - BVD0216-00- Video

Review of Ventline Replacement Fan Blade For Range Hoods - BVD0216-00

Hello, neighbors. I'm Steven here with etrailer.com. Today we're looking at this replacement fan blade for your Ventline RV range hoods. Now folks, I'll throw a graphic up here real quick. This is what we are getting today, just a simple replacement fan, and again, it's gonna replace the exhaust fan blade for your Ventline RV range hood, and it does rotate counterclockwise. Now folks, this does fit Ventline PS0721 B and T series range hoods, and it is made here in the USA. more


Watch Video

4/22/2024 10:39:43 AM



Review of Malone T Slot Fit Kit for Malone Kayak Carriers - MPG8287- Video

Review of Malone T Slot Fit Kit for Malone Kayak Carriers - MPG8287

Hello Neighbors, I'm Steven here with etrailer.com. Today we're taking a look together at these Truck Rack T-slot Fit Kit for your Malone Kayak Carriers. Now folks, these will let you mount a Malone kayak or surfboard carrier to your truck bed ladder rack with the top channels. And this does work with a couple different models of those, so make sure you're checking out our website here at etrailer.com. I'll put those item numbers up on the screen. Those are sold separately. more


Watch Video

4/22/2024 10:27:56 AM



Review of Reese Gooseneck Hitch - Replacement Quick Turn Puck - 116517- Video

Review of Reese Gooseneck Hitch - Replacement Quick Turn Puck - 116517

Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this replacement quick turn puck for the Reese Elite under-bed system. Now this part here is a replacement puck. It'll replace the damaged or missing quick turn puck on your Reese fifth wheel Elite Series under-bed mounting kit. It is for quantity of one puck. Now this puck is designed to attach to the hitch cross member of the mounting kit with a bolt and a washer, and allows the tabs on your fifth wheel to lock to your under-bed system. more


Watch Video

4/22/2024 10:22:12 AM



Review of etrailer Camper Jacks - Trailer Jack Handle Clip - TJD-12000-CLIP- Video

Review of etrailer Camper Jacks - Trailer Jack Handle Clip - TJD-12000-CLIP

Hello, neighbors and friends, Steven here with etrailer.com. Today, we're looking together at this replacement handle clip for your etrailer and Ram square direct-weld-on jacks. Now, folks, again, this will replace the handle clip on your etrailer or Ram square direct-weld-on jacks with specifically a 10,000 pounds lift capacity. Now, I'll put them, item numbers, part numbers there on the screen, that way, you can check them out later if you need to. Now, this clip does secure the handle while your jack is in transit. It's a very simple weld-on installation. more


Watch Video

4/22/2024 10:19:04 AM



Review of Global Link RV Door Parts - Key 352 - 295-000131- Video

Review of Global Link RV Door Parts - Key 352 - 295-000131

Hello neighbors, Steven here with etrailer.com. Today we're looking at a replacement key for your Global Link RV locks, specifically key number 352. Now folks, this replacement key will work again with those Global Link RV entry doors, baggage doors, or the device locks. Again, this specific key is key to 352. You can see it engrave there, G 352. And again, you get one key quantity one, and it's got the nice hard plastic covering over it to make it easier to differentiate through other keys on your key ring. more


Watch Video

4/22/2024 10:06:05 AM



Review of Titan Chain Tire Chains Replacement Cross Chain and Hooks - TC5820- Video

Review of Titan Chain Tire Chains Replacement Cross Chain and Hooks - TC5820

Hello, neighbors. Steven here with etrailer.com. Today we're looking at a Titan Chain Replacement Cross Chain and the Hooks for your V-Bar Links. Now, folks, this does fit the following Titan Chain V-Bar Type RP Passenger Tire Chains, and those are sold separately. I'll put those two item numbers on the screen. And again, this will be one replacement link, or cross chain link and hooks, for those kits. more


Watch Video

4/22/2024 9:33:54 AM



Review of Fulton Replacement Trailer JackHandle Kit - F0933301S00- Video

Review of Fulton Replacement Trailer JackHandle Kit - F0933301S00

Hello, neighbors. I'm Steve here with etrailer.com. Today, we're looking at this Replacement Sidewind Handle Kit for your Fulton XP10 Series Marine Jacks. Now, folks, this does replace the sidewind handle for your Fulton XP10 Series Marine Jacks. Now, it is designed for all these Series Marine Jacks. I'll pop them up on the screen. more


Watch Video

4/22/2024 9:28:21 AM



Review of Camco Heater Dust Cover - CAM57713- Video

Review of Camco Heater Dust Cover - CAM57713

Hello neighbors, Steven here with etrailer.com. Today we're looking at this CAMCO custom fit dust cover, specifically for your Olympian Wave-6 Catalytic Heaters. That's right, folks, so this dust cover will shield your Olympian Wave-6 Catalytic Heater, that's sold separately. It's item number CAM57341 if you wanna purchase that. And like I said, it's gonna shield this from dust, debris, dirt. It is for use when the heater is wall mounted. more


Watch Video

4/22/2024 9:11:30 AM



Review of Camco RV Propane Tank Covers - CAM40543- Video

Review of Camco RV Propane Tank Covers - CAM40543

Hello neighbors and friends. I'm Steven here at etrailer.com. Today we're looking at this replacement lid for your Camco RV polyethylene propane tank covers. Now folks, this particular one is white, and again, this will replace the lid for that propane tank cover. It's gonna fit dual 20-pound tanks. All the mounting hardware is included that you see before you. more


Watch Video

4/22/2024 8:55:41 AM



  3     4     5